Related Manuals for Pentair Intellichem 521498
Summary of Contents for Pentair Intellichem 521498
- Page 1 INTELLICHEM CONTROLLER ® FIRMWARE UPGRADE KIT INSTALLATION GUIDE IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS...
-
Page 2: Table Of Contents
Kit contents The following items are included in the Kit P/N 521498 ® • Programmer IntelliChem Controller - P/N 521469 • Installation Guide (this manual) System requirements ® • Windows 10, 8 or 7 Technical Support (US) 8 AM to 7.30 PM (US Eastern and Pacific Time) Phone: (800) 831-7133 Related manuals IntelliChem Controller Installation and User’s Guide (P/N 521363) -
Page 3: Intellichem Controller Firmware Update Instructions
® IntelliChem Controller Firmware Update Instructions The IntelliChem Controller firmware updates are performed using the update ® programmer connected to a USB port on a computer running Microsoft Windows version 10, 8, or 7. Connect Programmer Cables Disconnect power to the IntelliChem Controller. Open the front the cover and disconnect the 18 VAC supply connector J10 on the right side of the IntelliChem Controller circuit board (as shown below). -
Page 4: Installing Intellichem Controller Firmware Upgrade Setup Wizard
Navigate to HOMEOWNER AND PRO RESOURCES -> SOFTWARE Download and unzip file: IntelliChem Firmware Upgrade v1-080.zip If it exists on your computer, Delete directory C:\Pentair\IntelliChem\. From folder ICHEM_1060, Unzip file: IntelliChem_Firmware_Upgrade_v1- 060.zip Install the firmware upgrade setup wizard by double-clicking on the file you just unzipped IntelliChem_Firmware_Upgrade_v1-060.exe. - Page 5 12. To verify if the Polulu device driver is installed correctly, Windows Device Manager should display as shown below. 13. For Windows 7, 8 users: Double-click on the desktop icon “IChem_ ® Script_1080” to begin programming IntelliChem Controller firmware version 1.080. Wait for programming to complete. IntelliChem Controller Firmware Installation Guide...
- Page 6 14. For Windows 10 users: • Double-click on the desktop icon IChem_Script_1080 • Enter the Pololu USB Programming COM port number ONLY from the Device Manager (i.e… 3) IntelliChem Controller Firmware Update Installation Guide...
-
Page 7: Troubleshooting
Troubleshooting If the programmer exits without showing a progress bar, there was an error in the setup or installation. Check the following: The programmer is installed correctly ® IntelliChem Controller unit is powered on Driver is properly installed No communication with Pololu Programmer, check USB connection. No communication with IntelliChem Controller, check connection to ISP on the IntelliChem Controller board. - Page 8 1620 Hawkins Ave., Sanford, NC 27330 • (919) 566-8000 10951 West Los Angeles Ave., Moorpark, CA 93021 • (800) 553-5000 www.pentair.com All Pentair trademarks and logos are owned by Pentair or by one of its global affiliates. ® IntelliChem is a registered trademark of Pentair Water Pool and Spa, Inc. and/or its affiliated companies in the United States and/ or other countries.