Stihl MSA 160 T Instruction Manual page 36

English
Definitions
1. Battery Compartment
Accommodates the battery in the
unit.
2 Control Handle
The support handle for the right
hand, located on the top of the saw.
3. Trigger Switch Lockout
Must be depressed before the
trigger switch can be activated.
4 Trigger Switch
Switches the motor on and off and
controls the speed of the motor.
5. Front Hand Guard
Provides protection against
projecting branches and helps
prevent left hand from touching the
chain if it slips off the handlebar. It
also serves as the lever for chain
brake activation.
6 Chain Sprocket
The toothed wheel that drives the
saw chain.
7 Chain Tensioner
Permits precise adjustment of chain
tension.
8 Guide Bar
Supports and guides the saw chain.
9 Oilomatic Saw Chain
A loop consisting of cutters, tie
straps and drive links.
10 Bumper Spike
Toothed stop for holding saw steady
against wood.
34
11 Chain Catcher
Helps to reduce the risk of operator
contact by a chain when it breaks or
comes off the bar.
12 Chain Sprocket Cover
Covers the chain sprocket.
13 Captive Nut
The nut is integrally connected to
the chain sprocket cover and cannot
be lost.
14 Oil Filler Cap
For closing the oil tank.
15 Front Handle (Handlebar)
Handlebar for the left hand at the
front of the saw.
16 Ring for Rope
Pull-out ring for attaching rope.
17 Ventilation Slots
Cooling air flows to the motor
through the slots.
18. Battery Locking Tabs
Secure the battery in the unit.
19. Battery
Supplies the motor with electrical
power.
20. Push Button
For activating light emitting diodes
(LEDs) on battery.
21. Light Emitting Diodes (LEDs) on
Battery
Indicate the state of charge and
operating condition of the battery.
22. Charger
Charges the battery.
23. Light Emitting Diode (LEDs) on
Charger
Indicates charger operating mode
and certain problems.
24. Power Supply Cord
Supplies electric current to charger.
MSA 160 T