Specifications - Stihl HT-KM Instruction Manual

Definitions
1 Drive Tube
Encloses and protects the drive
shaft between the coupling sleeve
and gearbox.
2 Oil Filler Cap
For closing the oil tank.
3 Oil Tank
Tank for chain lubricating oil.
4 Oilomatic Saw Chain
A loop consisting of cutters, tie
straps and drive links.
5 Guide Bar
Supports and guides the saw chain.
6 Chain Guard (Scabbard)
To protect the operator from
touching the chain.
7 Chain Sprocket Cover
Covers the sprocket.
8 Hook
For pulling branches away.
9 Handle Hose
For holding and controlling the unit
with the hand during operation.
10 Sleeve
Locates drive tube in coupling
sleeve.
11 Chain Tensioner
Permits precise adjustment of chain
tension.
12 Chain Sprocket
The toothed wheel that drives the
saw chain.
HT-KM

Specifications

Chain Lubrication
Fully automatic, speed-controlled oil
pump with rotary piston
Oil tank capacity: 220 cc (0.22 l)
Weight
without cutting
attachment: 1.3 kg
Cutting Attachment
Actual cutting length may be less than
the specified length
STIHL cutting attachments complying
with CSA Standard Z 62.3:
Rollomatic E Mini guide bars
Cutting length: 25, 30 cm
Pitch: 1/4" P (6.35 mm)
Groove width: 1.1 mm
1/4" P chain
Picco Micro 3 (71 PM3) Type 3670
Pitch: 1/4" P (6.35 mm)
Drive link gauge: 1.1 mm
Chain Sprocket
8-tooth for 1/4" P
Other cutting attachments
Other cutting attachments complying
with CSA Standard Z 62.3 are available:
see section CSA Standard Z 62.3, the
chain leaflet inside the chain box or
contact your local STIHL dealer.
Please ask your STIHL dealer to
properly match your powerhead with the
appropriate bar/chain combinations to
reduce the risk of kickback injury.
English
25