Specifications; Maintenance And Repairs - Stihl HL 100 Instruction Manual

Specifications

EPA / CEPA
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
A = 300 hours
B = 125 hours
C = 50 hours
STIHL single cylinder four-stroke engine
with mixture lubrication
HL 100, HL 100 K
Displacement: 31.4 cc
Bore: 40 mm
Stroke: 25 mm
Engine power to
ISO 8893: 1.05 kW (1.4 bhp)
Rated speed to
ISO 8893: 7,000 rpm
Idle speed: 2,800 rpm
Cut-off speed: 9,500 rpm
Valve clearance,
inlet: 0.10 mm
Valve clearance,
exhaust: 0.10 mm
Ignition System
Electronic magneto ignition
HL 100, HL 100 K
Spark plug (resistor
type): Bosch USR 7AC
Electrode gap: 0.5 mm
This ignition system meets all
requirements of the Canadian
Interference-Causing Equipment
Regulations ICES-002.
Starter rope
Diameter: 3.0 mm
Length: 850 mm
Fuel System
Fuel tank capacity: 530 cc (0.53 l)
Weight
Dry weight with 0° gearbox
HL 100 K: 6.0 kg
Dry weight with 135° adjustable cutter
bar
HL 100: 6.9 kg
Cutting blades
Type: Double-edged for
bidirectional
cutting
Cutting length: 500 mm
Tooth spacing: 35 mm
Tooth height: 20 mm
Sharpening angle: 45° to horizontal

Maintenance and Repairs

Users of this machine may only carry out
the maintenance and service work
described in this user manual. All other
repairs must be carried out by a
servicing dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer. STIHL dealers are
regularly given the opportunity to attend
training courses and are supplied with
the necessary technical information.
When repairing the machine, only use
replacement parts which have been
approved by STIHL for this power tool or
are technically identical. Only use high-
quality replacement parts in order to
avoid the risk of accidents and damage
to the machine.
STIHL recommends the use of original
STIHL replacement parts.
Original STIHL parts can be identified by
the STIHL part number, the {
logo and the STIHL parts symbol K
(the symbol may appear alone on small
parts).
English
27