Approved Power Tool Attachments - Stihl HL 100 Instruction Manual

English
Horizontal Cut (with straight cutter bar)
Cutting without standing directly next to
the hedge, e.g. flowerbed between
operator and hedge.
Hold the cutter bar at an angle of 0° to
10° as you swing the hedge trimmer
horizontally.
Swing the cutter bar in an arc towards
the outside of the hedge so that the
cuttings are swept to the ground.
10
Approved Power Tool
Attachments
The following STIHL attachments may
be mounted to the basic power tool:
FH
HT
FCS
BF
KB
Interchangeable
Attachment
1) 2)
FCS
1) 2)
FH
HL 0°
2)
HL 135°
1) 3)
HT
1) 2)
BF
1) 2)
KB (4601)
1) 2)
KW (4601)
1)
Must not be mounted to versions
with short shaft (HL 100 K)
2)
Loop handle required
3)
May be mounted to versions with
handle hose and long shaft
(HL 100)
KW
Application
Edger
Power scythe
Long reach hedge
trimmer
Long reach hedge
trimmer
Pole pruner
Pick tines
Bristle brush
PowerSweep
HL 100, HL 100 K