Communication System Manual
4.1.3 Hardware and software requirements
The following hardware and software items are required in order to communicate with 3WN1/3WS1 circuit-
breakers via PROFIBUS-DP:
Hardware:
• •
Circuit-breaker
Fixed-mounted
Fixed-mounted
Draw-out
Draw-out
* Circuit-breaker incl. communication-capable overcurrent release and connecting cable
• Overcurrent release version 5
• Overcurrent release version 8
• DP/3WN1, 3WS1 interface module
(including circuit-breaker connecting cable)
(ET 200 U used in the example:
Software:
• •
3.5" diskette with type/GSD file for the software connection of 3WN1/3WS1 to
PROFIBUS-DP (bus configuration). This diskette is supplied with the interface.
•
Software for configuring the PROFIBUS-DP bus: "COM-PROFIBUS"
Order number:
Manual order number:
4.2 Functionality and bus connection
The following circuit-breaker output data can be read from 3WN1/3WS1 via PROFIBUS-DP:
Circuit-breaker key data
Operational states
Operational data
... and input data can be written to the circuit-breaker
• Execute switching actions (switch circuit-breaker ON or OFF)
Version 1.0 (02/98)
Version
5
3WN1xxx-xxRxx-xxxx - Z = F01 *
8
3WN1xxx-xxVxx-xxxx - Z = F01 *
5
3WN1xxx-xxRxx-xxxx - Z = F01 *
8
3WN1xxx-xxVxx-xxxx - Z = F01 *
: 3WX31415JC12 or (MLFB for ordering)
: 3WX31416JE12
: 3RK1002-0BB00-0AA0
6ES5 895-6SE12
6ES5 998-3ES12
(e.g. circuit-breaker size)
(e.g. switching state, "Tripped" signals)
(e.g. actual phase current I
© Copyright Siemens AG 1998. All rights reserved.
3WN1, 3WS1 Circuit-Breakers
MLFB
(MLFB for ordering)
Power supply
ET 200 U
Bus module
Standard DIN rail
Digital inputs
Digital outputs
(for SIMATIC S5 as bus master)
(Individual license, Catalog ST50 1997)
(Catalog ST50 1997)
)
L1
: 6ES5 931-8MD11
: 6ES5 318-8MB12
: 6ES5 700-8MA11
: 6ES5 710-8MA11
: 6ES5 431-8MA11
: 6ES5 450-8MD11)
81