Summary Of Important Safety Information; Before Installation; During Installation; General Safety - North Star 157102 Owner's Manual

Read and understand this owner's manual completely before using the pump, particularly
the plumbing section.
Improper use of the pump could result in serious injury or illness for the operator or
nearby persons/animals, or cause damage to the environment.
LISTED BELOW is a summary of safety information of particular importance. See individual
sections of this owner's manual for more details.

-------------------------------- BEFORE INSTALLATION---------------------------

•
READ and FOLLOW the plumbing instructions and warnings in the RV manual.
•
CHECK for properly sized wiring and correct electrical protection.
•
CONFIRM the mounting location will allow adequate ventilation to prevent overheating.
•
TURN power OFF to the existing pump(s).
•
RELIEVE system pressure.
•
DISCONNECT the main power to the pump.

------------------------------ DURING INSTALLATION---------------------------

•
EXERCISE CAUTION when attaching pump to 12 Vdc power supply. Follow the steps listed
in the Installation section of this manual when connecting the pump to the power supply.
•
CHECK and TEST installed pump as directed in this manual.
•
DO NOT MODIFY pump design.

-------------------------------GENERAL SAFETY---------------------------------

•
READ and FOLLOW instructions and warnings in this manual.
•
READ and FOLLOW instructions and warnings in the RV manual.
•
DO NOT USE flammable or corrosive chemicals in this pump.

-----------------------------------OPERATION--------------------------------------

Before Use
•
INSPECT and PREPARE pump before each use as directed in this manual.
•
SANITIZE the pump before each use and prior to storage.
•
DO NOT TURN ON POWER to pump until ready to USE to avoid unintentional flow.
During Use
•
TURN OFF power to pump, and RELIEVE system pressure before leaving pump unattended.
•
SEE Troubleshooting section of this manual before attempting any repairs. Wear personal
protective equipment and follow safety instructions.
After Use
•
SANITIZE pump according to the directions provided in this manual.
Immediate response is necessary in the event of a pump leak. See instructions below:
Pump leak If the pump develops a leak, immediately stop using. Turn off power to the
pump and refer to the troubleshooting section of this manual, as applicable.
Summary of Important Information
WARNING

Accident Procedures

5