Updating The Firmware; Initializing The Unit; Setting The Display Language - Sony DSX-GS80 Operating Instructions Manual

Canceling the
Demonstration Mode
You can cancel the demonstration display
which appears when the source is off and
the clock is displayed.
1
Press MENU, rotate the control dial to
select [GENERAL], then press it.
2
Rotate the control dial to select
[DEMO], then press it.
3
Rotate the control dial to select
[DEMO-OFF], then press it.
The setting is complete.
4
Press (back) twice.
The display returns to normal reception/
play mode.

Updating the Firmware

To update the firmware, visit the support site
on the back cover, then follow the online
instructions.
Note
During the update, do not remove the USB device.

Initializing the Unit

Initializing the unit will erase the clock
settings and all your settings stored in the
backup memory.
[INITIALIZE] appears only while the source
is off and the clock is displayed.
1
Press MENU, rotate the control dial to
select [GENERAL], then press it.
2
Rotate the control dial to select
[INITIALIZE], then press it.
3
Rotate the control dial to select
[INIT-YES], then press it.
Note
Initialize the unit before discarding the unit to
prevent the leakage of phone information.

Setting the display language

After initializing the unit, the display
language setting display appears.
1
Press ENTER while [LANGUAGE] is
displayed.
The display language currently set
appears.
2
Rotate the control dial to select
[ENGLISH] or [SPANISH], then press it.
The setting is complete and the clock is
displayed.
This setting can be configured in the general
setup menu.
7
GB