Table of Contents
Advertisement
3.
Select [2], then select LD 1 in the following page.
The Define LD Menu screen appears (Figure 1.11).
FastBuild (tm) Utility (c) 2006 ATI Technology, Inc.
LD No
LD 1
Stripe Block :
Gigabyte Boundary : ON
Channel : ID
3 : Mas WDC WD3200AAJS-22B4
4 : Mas WDC WD1600JS-22NVB1
[ ] Up [ ] Down [ESC] Exit [Space] Change Option [Ctrl-Y] Save
Using the Define a New Array Screen
If necessary, press the tab key to move from field to field until the appropriate field
is highlighted.
Note: If you want to use the function of the following RAID Mode, you have
to install enough HDD.
RAID READY (1 piece of HDD); RAID 0,1 ,JBOD (2 or more pieces of HDD);
RAID 0+1 (4 pieces of HDD)
Selecting the RAID Mode
•
By default, this is set to Mirroring. To change to a different RAID mode,
press the spacebar until the mode that you want appears in the RAID Mode
box—RAID0/1/JBOD.
Note: Not all RAID levels are supported on all platforms.
Selecting the Stripe Block Size
•
Stripe block size is given in kilobytes, and affects how data is arranged on
the disk. It is recommended to leave this value at the default Optimal,
which is 64KB, but the values can be 64 KB and 128 KB. When choose RAID
1, the Stripe block size is unchangeable.
B350AM4-M USER MANUAL
[ Define LD Menu ]
RAID Mode
Total Drv
RAID 0
0
64 KB
[ Drives Assignments ]
Drive Model
Capacity (MB)
[ Keys Available ]
Figure 1.11 Define LD Menu
Past Init :
OFF
Cache Mode :
WriteThru
Assignment
320073
N
160042
N
75
Hide quick links:
Advertisement
Table of Contents
