Table of Contents
Advertisement
2-4-3. Installing Memory Modules
•
This motherboard accommodates four memory modules. It can support
four 288-pin DDR4 2667/2400/2133 MHz.
•
Do not remove any memory module from its antistatic packaging until
you are ready to install it on the motherboard. Handle the modules only
by their edges. Do not touch the components or metal parts. Always wear
a grounding strap when you handle the modules.
•
You must install at least one module in any of the four slots. Total memory
capacity is 64 GB.
•
Refer to the following to install the memory modules.
A.
Push the latches on each side of the DIMM slot down.
B.
Install the DIMM module into the slot and press it firmly down until it
seats correctly. Check that the cutouts on the DIMM module edge
connector match the notches in the DIMM slot.
C.
The slot latches are levered upwards and latch on to the edges of the
DIMM.
The four DDR4 memory sockets (DIMM1, DIMM2, DIMM3 and DIMM4) are divided
into two channels and each channel has two memory sockets as following:
Channel A: DIMM1, DIMM2
Channel B: DIMM3, DIMM4
B350AM4-M USER MANUAL
11
Hide quick links:
Advertisement
Table of Contents
