Charging - Kyocera BASIO 4 Basic Manual

◎ Do not touch the terminal part of microSD memory card.
◎ After using the product for a long time, the removed
microSD memory card may become warm. This is not a
malfunction.
46

Charging

The internal battery is not fully charged at the time of
purchase. Charge the battery before using the product.
When the red light turns into green, the charging will be
completed.
◎ The AC adapter and desktop holder are not water
resistant. Never charge the product if it becomes wet.
◎ The product may become warm while charging or during
other operations, this is not abnormal.
◎ When temperature of environment or the product is
extremely high or low, charging may be stopped. Charge
the battery at room temperature as much as possible.
◎ Charging the product while using the camera function,
the charging time may take longer than usual.
◎ Doing various operations with the specified charger (sold
separately) connected, the battery life may get short due
to the short time charging/discharging.
◎ Make sure the connection is correct if the charging light
of the product blinks in red. If the charging light continues
to blink, immediately stop charging, and contact an au
shop or Repair and Delivery Support Center.
◎ Keep a metal accessory or conductive materials (metal
pieces, pencil lead, etc.) from coming in contact with the
connection terminal and prevent them from getting inside.