Kyocera BASIO 4 Basic Manual page 33

② Wipe drained water.
* The mouthpiece (microphone), receiver/speaker,
external device port, earphone microphone terminal,
and buttons are particularly hard to drain water
from.
With those parts facing down, press them against
the cloth to wipe off any water.
③ Place the product on a dry towel or cloth, then leave it
at room temperature for a while.
3
Press the product gently against a clean
dry lint-free cloth, and wipe off water
remaining in the gaps such as in the
mouthpiece (microphone), receiver/
speaker, external device port, earphone
microphone terminal, etc.
4
Leave the product on a dry towel or cloth
for 1 hour or more at room temperature
to dry after removing drained water
thoroughly
Even after you take these procedures, water may remain on the
product. Do not place the product near things that you do not
want to wet.
Also, take care not to wet your clothes, bag, etc.
31