Target Places Which Are Removed Harnesses And Screws; Control Pcb - Mitsubishi Heavy Industries KXZ Series Service Manual

※ ：
Presence and shape of electric component
may vary according to a model.
(B) Power source for fan motor (DC) : CNA2, 1 - 3pin or CNA1, 1 - 4pin

Control PCB

Fig. 3 Target places which are removed harnesses and screws
(A) Power source for control PCB : CNA1, 1 3pin or CNA2, 1 -
Fig.2 Voltage measurement points
Remove harnesses from bands.
And, remove the harnesses which are bundled by these bands
from clips and connectors on the control PCB.
–
-
(−) (＋)
or
(＋) (−)
(＋)
or
(−)
※：
Presence and shape of electric component
may vary according to a model.
Remove screws.
(4 places)
118
–
'14 • KX-SM-221
4pin
(＋)
(−)