Using The Shaver - Panasonic ES‑RT47 Operating Instructions Manual

• Charging the battery for more than 1 hour will not affect
battery performance.
• Top‑up charging will not cause reductions in battery
performance.
Note
You cannot operate the shaver while charging.
While charging
The charge status lamp (
glows.
Abnormal charging
The charge status lamp (
• After charging is completed, turning the power switch ON with
the shaver plugged in will cause the charge status lamp (
light up and then turn off after 5 seconds.
This shows that the shaver is fully charged.
• Recommended ambient temperature for charging is 10 – 35 °C.
It may take longer to charge or the battery may fail to charge
properly in extremely high or low temperatures.
Charge the shaver within the recommended ambient temperature
range.
ES-RT47_ME.indb 9
After charging is completed
) The charge status lamp (
turns off.
) blinks twice every second.
) to
• When charging the shaver for the first time or when it has not
been in use for more than 6 months, the charging time may
change or the charge status lamp
minutes. It will eventually glow if kept connected.
Usingtheshaver
• Do not place your fingers on the power switch while using the
shaver. This may cause the shaver to turn off. Place your fingers
on the finger rest while using the shaver.
• We recommend using the shaver in an ambient temperature
range of 5 – 35 °C. If used outside this range, the appliance may
stop operating.
1
1
Pressthepowerswitch.
)
2
2
Holdtheshaverasillustrated
andshave.
• Start shaving by applying gentle
pressure to your face. Stretch your
skin with your free hand and move the
shaver back and forth in the direction
of your beard. You may gently increase
the amount of pressure as your skin
becomes accustomed to this shaver.
Applying excessive pressure does not
provide a closer shave.
( ) may not glow for a few
9
2014/04/24 18:50:15