Cleaning The Shaver; Lubrication; Cleaning With The Brush - Panasonic ES‑RT47 Operating Instructions Manual

Cleaningtheshaver
1. Disconnect the cord from the shaver.
2. Apply some hand soap and some water to the system outer
foil.
3. Turn the shaver on.
4. Turn off the shaver after 10 to 20
seconds.
5. Remove the outer foil section.
6. Clean the shaver, the outer foil
section, the trimmer, and the comb
attachment with running water.
7. Wipe off any drops of water with a dry cloth.
8. Dry the outer foil section, the shaver,
the trimmer, and the comb
attachment completely.
9. Attach the outer foil section to the shaver.
10. Lubricate the shaver.
12
ES-RT47_ME.indb 12
Lubrication(OilincludedforES-RT47)
To maintain shaving comfort for a long time, it is recommended
that the oil provided with the shaver is used.
1. Switch off the shaver.
2. Apply one drop of oil to each of the
system outer foil.
3. Raise the trimmer and apply one
drop of oil.
4. Switch the shaver on, and run it for
approximately five seconds.
5. Switch off the shaver, and wipe off any excess oil from the
system outer foil with a soft cloth.
Note
Apply the oil to the trimmer before and after each use.
Failure to apply the oil may cause the following problems due to
rust, wear or burn out.
- The trimmer has become blunt.
- Shorter operating time.
- Louder sound.
Cleaningwiththebrush
►Cleaningwiththelongbrush

Clean the system outer

foil (a), the shaver body
(b) and the trimmer (c)
using the long brush.
 
2014/04/24 18:50:16