Network Client Mode Communication Test; Xdcam Air - Sony PXW-Z280 Setup Manual

5.6. Network Client Mode Communication Test

After the network communication test is successful, the next step is to test Network Client Mode.
1 Select Network > Network Client Mode > NCM Settings Select in the setup menu, and select NCM
Settings1.
Note
NCM Settings1 is used as an example.

5.6.1. XDCAM air

1 Select Network > Network Client Mode in the setup menu, and set Setting to On.
2 Start communication with the CCM of XDCAM air.
When XDCAM air is accessed for the first time from a device, you must activate the device after
connecting to the CCM of XDCAM air.
In this case, the
displays "Connecting" and then "Connected" with the CCM name. Check the CCM UI of XDCAM air.
icon appears on the camcorder LCD screen, and Network Client Mode status
31