Table of Contents
Advertisement
12.3. Use Cases
12.3.1. Live Streaming
Problem: Cannot start streaming
Display or Message
STRM icon is not displayed
Problem: Cannot reach target bitrate for QoS streaming
Display or Message
12.3.2. Camera Remote Control
Problem: Cannot control zoom/iris etc.
Display or Message
Zoom/iris control from CCM UI is
disabled
Zoom/iris control of CCM UI is
enabled but does not operate.
12.3.3. Intercom Operation
Problem: Cannot use the intercom
Display or Message
Intercom not available icon is
displayed.
12.3.4. File Naming using Planning Metadata
Problem: Cannot set file name
Display or Message
"123_0001" is displayed as the
clip name on the camcorder LCD
Reason & Solution
Streaming cannot start in the following cases.
• Camcorder is operating in DVCAM recording format (System > Rec Format > Codec is
set to DVCAM(MXF))
• Camcorder is operating in S&Q mode (Recording > S&Q Motion > Setting is set to On)
• Camcorder is operating in interval recording mode (Recording > Interval Rec > Setting
is set to On)
Reason & Solution
APN setting may be incorrect after changing a SIM card.
Check the APN setting using a computer.
Carrier network environment is not good.
Reason & Solution
Network > Network Client Mode > NCM Settings[1,2,3] > Camera Control in the setup
menu is set to Disable.
Change the Camera Control setting to Enable.
The SERVO/MANUAL switch of the lens is set MANUAL.
Check the lens control switch.
Reason & Solution
The intercom function is not available in the following cases because of some system
restrictions.
• Camera > Focus > Face Detection AF in the setup menu is set to Face Only AF or Face
Priority AF.
• Recording > Proxy Rec > Setting in the setup menu is set to On.
• Recording > 4K&HD(Sub) Rec > Setting in the setup menu is set to On.
• High bit rate streaming
Reason & Solution
Media > Clip Naming > Auto Naming in the menu is set to Title.
Change the setting in the setup menu to Plan (see
No planning metadata has been loaded.
Check Media > Planning Metadata > Properties in the setup menu (see
Settings"
).
44
"9.1. Camcorder Settings"
"9.1. Camcorder
).
Hide quick links:
Advertisement
Table of Contents
