Product Features; Foot Assembly - Saturn ST-HT0484 Manual

Table of Contents

Advertisement

2.
Cleaning and user mainte-
nance shall not be made by children
unless they are older than 8 and su-
pervised.
3.
Keep the appliance and its
cord out of reach for the children less
than 8 years.
4.
Children of less than 3 years
should be kept away unless continu-
ously supervised.
5.
Children aged from 4 years
and less than 8 years shall only switch
on/off the appliance which provided
that it has been placed or installed in
its intended normal operating position,
and they have been given supervision
or instruction concerning use of the
appliance in a safe way and under-
stand the hazards involved.
6.
Children aged from 4 years
and less than 8 years shall not plug in,
regulate and clean the appliance or
perform user maintenance.

PRODUCT FEATURES

1.
Elegant glass panel.
2.
2 "X" high quality aluminum
heating element: quick heating with
higher energy savings.
3.
Touch
screen
remote control.
4.
Timer from 1 to 24 hours to
turn the convector heater on or off at
the desired time.
5.
Digital display with automatic
room temperature display.
6.
For wall mounting or free
standing.

FOOT ASSEMBLY

Please put the feet on the heater's
housings, and fix them with supplied
ST4*10*3 screws. To move the appli-
ance, switch it off and disconnect it
from the mains, then wait for it to cool
down. Use the side gripping points for
transport.
control
and
4
WALL ASSEMBLY
Please note that the product must be
installed at least 15 cm from the floor
and 50 cm from the ceiling.
Perform the operations below for wall
mounting:
1.
Make two holes in the wall
515 mm apart.
2.
With a diameter of 8 mm and
depth of 40 mm, insert the supplied
anchors in the holes, and then use a
screwdriver to tighten in screws sup-
plied with anchors, screws must pro-
trude 6 mm from the anchor, finally
hang the product in the hook holes of
on the back.
Note: Before drilling, make sure that
there are no wires or other pipes lo-
cated under the wall to prevent dam-
age.
TOUCH
SCREEN
CONTROL OPERATION
Insert the plug in a suitable power
socket.
The touch screen buttons located on
the product correspond to the remote
control functions:
1.
display
2.
+ button
3.
- button
4.
power
5.
mode
6.
temperature
7.
timer
AND
REMOTE

Advertisement

Table of Contents
loading

Table of Contents