Controlled Positioning With The Fm 453 - Siemens SIMATIC S7-400 Configuration And Use Manual

Technological Functions of the S7-400
4.6

Controlled Positioning with the FM 453

Introduction
The FM 453 is a positioning module for servo-controlled positioning with stepping
motors and servomotors. It provides the following features to relieve the load on
the CPU:
• Actual-value acquisition and servo-control positioning
• Data storage on the FM 453
Functions of the FM 453
The FM 453 provides you with the following functions:
• Configuration in inching mode
• Controlling
• Reference point approach
• Incremental mode, relative
• Manual data input (MDI)
• Automatic and automatic single block
Performance characteristics of the FM 453
The FM 453 has the following performance characteristics:
• Number of axes:
-- 3 linear or rotary axes
• Inputs and outputs
-- 4 digital inputs per axis
-- 4 digital outputs per axis
• Typical drives
-- Asynchronous motor
-- DC motor
• Connectable encoders for positioning with servomotors:
-- Incremental encoder 5 V differential signal, symmetrical
-- SSI absolute encoder
4-8
Automation System S7-400 Configuration and Use
A5E00442711-02