Advertisement
JBC
Syntax
Operation
Data Types
Description
Condition Flags
Addressing Modes
Semiconductor Group
30Mar98@15:00h
Relative Jump if Bit Set and Clear Bit
JBC
op1, op2
IF (op1) = 1 THEN
(op1) = 0
(IP) ← (IP) + sign_extend (op2)
ELSE
Next Instruction
END IF
BIT
If the bit specified by op1 is set, program execution continues at the loca-
tion of the instruction pointer, IP, plus the specified displacement, op2.
The bit specified by op1 is cleared, allowing implementation of semaphore
operations. The displacement is a two's complement number which is sign
extended and counts the relative distance in words. The value of the IP
used in the target address calculation is the address of the instruction fol-
lowing the JBC instruction. If the specified bit was clear, the instruction fol-
lowing the JBC instruction is executed.
E
Z
0
B
E Always cleared.
Z Contains logical negation of the previous state of the specified bit.
V Always cleared.
C Always cleared.
N Contains the previous state of the specified bit.
Mnemonic
JBC
bitaddr
Q.q
C166 Family Instruction Set
V
C
N
0
0
B
Format
, rel
AA QQ rr q0
75
Instruction Description
Version 1.2, 12.97
JBC
Bytes
4
Hide quick links:
Advertisement
