Figure 54 Unit Installation Area; Table 33 Specifications For The Unit Installation Area - Fujitsu ETERNUS DX8100 S3 Site Planning Manual

2. Rack Installation Specifications
Installable Racks

Figure 54 Unit Installation Area

Front door of the rack

Table 33 Specifications for the Unit Installation Area

Specification
(1) Rack front space
(Space between the fixed part of the ETERNUS DX on the
front side and the front of the rack)
(2) Mount bracket length
(Size between each end of the front and rear rack pillars)
(3) Rack space
(Space between the fixed part of the ETERNUS DX on the
front side and the rear of the rack)
(4) Rack mount kit installation area
■
Placement Requirements
When determining service areas, refer to the manual of the rack that is to be used.
Make sure to perform the installation according to the placement requirements described in
cations" (page 10)
FUJITSU Storage ETERNUS DX8100 S3/DX8700 S3/DX8900 S3 Hybrid Storage Systems Site Planning Guide
(1) (2)
ETERNUS DX
(4)
Rack pillars
and "Installation Environment" (page
Copyright 2020 FUJITSU LIMITED
(3) Rack rails
Rear door of the rack
Condition
40mm or more
685mm or more
775mm or less
890mm or more
482mm or more
(recommended)
32).
79
"Installation Specifi-
P3AM-9422-13ENZ0