What Are The Power Requirements For This Station; Power Input: Will This Station Work In Other Countries; Setup: How Do I Setup My Station; Mounting: Where Do I Mount/Position My Sensor - La Crosse Technology S81120 Faqs

WHAT ARE THE POWER REQUIREMENTS FOR THIS STATION?

TX145WSDTH: 1 ML2032 battery (included)
S81120: 5 volt power cord (required) and optional 2 "AA" alkaline batteries for backup of your
time and date.
POWER INPUT: WILL THIS STATION WORK IN OTHER
• No. This station operates at 120 volts and is not compatible to other country power sources.

SETUP: HOW DO I SETUP MY STATION?

Your station is a fully functional standalone station.
1. Remove the Isolation Tab from the TX145WSDTH sensor and turn the switch to ON.
2. Install power cord into wall outlet, and into you S81120 station.
3. Let sensor and station sit within 10 feet of each other for several minutes to lock the sensor
signal to the display.

MOUNTING: WHERE DO I MOUNT/POSITION MY SENSOR?

TX145WSDTH:
For Accurate Measurements
- Ensure the sensor is mounted level with the Solar Panel facing directly
to the south. This will help optimize battery life and transmit correct wind
direction readings.
- Ideally, the Breeze Pro Sensor should be mounted on the tallest object in
your area. Avoid positioning the sensor in line or below eaves, rooflines,
trees, or other objects that may obstruct wind readings.
- Make sure all screws on the Mounting Bracket, Winds Cups, Wind Vane,
and Battery Compartment are securely fastened.
- The sensor should be mounted with the Wind Cups on top.
Note: General Wind Sensor mounting video: http://bit.ly/wind_sensor_mounting
COUNTRIES?
3 | P a g e