How Do I Reset The Temperature/Humidity Readings; What Is Feels Like And Dew Point Temperature; How Do I Set Alerts - La Crosse Technology S81120 Faqs

HOW DO I RESET THE TEMPERATURE/HUMIDITY READINGS?

Your temperature and humidity readings are reset individually.
1. Press and release the TEMP button to view the reading you wish to reset.
2. Hold the MINUS (-) button for 5 seconds to reset individual temperature or humidity value to
current temperature, humidity, time and date.
3. Press and release the LIGHT button to exit.

WHAT IS FEELS LIKE AND DEW POINT TEMPERATURE?

Feels Like temperature indicates both Wind Chill and Heat index on stations with wind speed
• Feels Like Temperature shows Wind Chill: When the temperature is below 50°F, and
generally a 5 mph sustained wind speed, the Feels like Temperature is showing Wind Chill.
• Feels Like temperature shows Heat Index: When the temperature is above 80°F, the Feels
like temperature is showing the Heat Index.
• Feels Like temperature shows Current Temperature: When temperature is between 51°F
and 80°F, the Feels like temperature will remain the same as the outdoor temperature
regardless of humidity or wind speed.
Set Alerts:
1. Hold the ALERTS button 2 seconds to enter Alert Settings. (Wind Alert Icon and ALERT OFF
will show for selected area)
2. Press and release the + or – button to turn alert ON
3. When the alert is ON, the alert value is flashing. Use the + or – buttons to set.
4. Hold the + or – buttons to scroll quickly.
5. Press and release ALERTS button to move to next item.
6. Leave an alert OFF (disarmed) and press the ALERTS button to skip setting that alert value
7. The alert icon will show when the alert is active.
8. When armed alert value is reached, station will beep 5 times each minute, until out of alert
range. (1 second beep once, sound for 5 seconds, wait 55 seconds and then repeat began
to ring for 5 seconds.)
9. The flashing Alert Icon will indicate if it is a LO or HI alert.
10. Press any button to stop the temp alert sound. The alert icon will flash while value is in alert
range.
Alert Setting Order:
• High Wind Speed Value 0-111.8 (0-180kph)
• 24 hour Rainfall (Will only show if rain sensor is connected)
• Outdoor LO Temperature ON/OFF

HOW DO I SET ALERTS?

8 | P a g e