La Crosse Technology S81120 Faqs page 4

Included Mounting Accessories
Adjustable Base
The main bracket used for mounting
onto flat surfaces or with added U-bolts (not included).
The grooves and Hand Screw allow the brac ket to secure to
angled surfaces while still ensuring the Mast and sensor are level.
Basic Installation Options
Fence posts, poles, decks, and even mailboxes are all common mounting options due to their convenience.
Many users prefer these types of locations as the data they provide is accurate from their ground level
perspective. However, because wind in these spots is often affected by obstructions, the readings may
differ compared to local reporting stations.
1A Adjustable Base
Mast
The horizontal conduit where the sensor
attaches. This Piece will connect to either
the Adjustable Base or Pole Adapter.
Basic Assembly
1A. Mount the Adjustable Base onto a flat surface
using the provided four long screws.
1B. Secure the Pole Adapter to a cylindrical conduit
using the provided two small screws.
2. Insert the Mast into the Breeze Pro Sensor and
tighten the provided screws on the sides.
3. Use the Hand Screw to attach the Mast to either
the Adjustable Base or Pole Adapter. Ensure the
sensor is level, facing south, and securely
fastened at all mounting points.
Hand Screw
Used to lock down and secure the Mast
to the Adjustable Base orPole Adapter.
Alignment Arrows
Provide exact 90 or 180 degree
angles when aligned with the arrow
on the Mast.
Pole Adapter
Used in place of the Adjustable Base
for mounting on top of cylindrical
conduits.
1-Inch Maximum Pole Diameter
1B Pole Adapter
4 | P a g e