Whirlpool SF365BEY Use And Care Manual page 27

The oven light
The oven light will come on when you open
the oven door.
Electrical Shock and
Personal Injury Hazard
l
Make sure oven and light bulb are
cool and power to the range has been
turned off before replacing the light
bulb. Failure to do so could result in
electriial shock or burns.
*The bulb cover must be in place when
using the oven. The cover protects
the bulb from breaking, and from high
oven temperatures. Because bulb
cover is made of glass, be careful not
to drop it. Broken glass couM cause
injury.
To replace the oven light:
1. Unplug
appliance or
disconnect
at the
main power supply.
2.
Remove
the glass bulb cover in the back
of the oven by pushing the wire holder to
the side and pulling out bulb cover.
3.
Remove
the light bulb from its socket.
Replace
the bulb with a 40-watt appliance
bulb.
4. Replace
the bulb cover and
snap
the
wire holder into place.
Plug in
appliance
or
reconnect
at the main power supply.
NOTE: The oven light should not be used
during the Self-Cleaning cycle. Use during
the Self-Cleaning cycle will shorten the life of
the bulb.
27