Whirlpool SF365BEY Use And Care Manual page 24

Lift-up cooktop
1. Remove surface burner grates and
reflector pans.
2.
Lift
front of cooktop at both front corners
until the support rods lock into place.
Personal Injury Hazard
Be sure both support rods are fully
extended and in the locked position.
Failure to do so could result in personal
injury from the cooktop accidentally
falling.
Product Damage Hazard
Do not drop the cooktop. Damage could
result to the porcelain and the cook-top
frame.
3.
Wipe
with warm, soapy water. Use a
soapy steel-wool pad on heavily soiled
areas.
4. To
lower the cooktop, lift
cooktop from
both sides while pressing the support
rods back to unlock them.
Lower
the
cooktop into place.
Replace
reflector
pans and surface burner grates.
Surface burners
1. Lift up
the cooktop, following the instruc-
tions above.
2. Before cleaning, remove
screws that
hold each of the burners in place. The
screws prevent the burners from moving
during shipment.
Remove
the shipping
screws with a Phillips screwdriver and
lift
the burners up and out. This separates
the burners from the mounting bracket
under each burner pair.
3.
Wipe
off surface burners with warm,
soapy water and a sponge after each
use.
To remove cookedon food, soak
the burners in a vinegar and water
solution for 20-30 minutes. Scrub with a
plastic scrubbing pad.
24