Page 2
NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current.
Revision Record Issue Date Remarks Jan 2016 First Issue...
Page 4
Bracket for Customer Display Integrated to P-Series Stand Introduction This kit provides a bracket for a customer display integrated to the P-Series Stand.
7761- K461 (Bracket for Customer Display) Installation Procedure 1. Pivot the terminal back. 2. Remove the Upper Stand Cover by pivoting it away from the stand. The cover has a simple snap fit connection at the top.
Page 6
7761- K461 (Bracket for Customer Display) 3. Loosen the thumbscrew to open the Cable Door. 4. Remove the screw that secures the NCR Logo Stand Badge. Remove the badge.
Page 7
7761- K461 (Bracket for Customer Display) 5. Install the Bracket onto the back of the customer display. 6. Install the customer display and bracket onto the back of the P-Series Stand. a. Hook the bottom of the customer display bracket under the P-Series Stand.
Page 8
7761- K461 (Bracket for Customer Display) b. Pivot the assembly into position on the P-Series Stand and secure it from the inside with screws (2). 7. Connect the cables to the display and route the cables up through the P-Series Stand.