Panasonic CF-T7 Series Reference Manual page 88

Troubleshooting (Advanced)
The device will not operate properly if a different mouse driver is installed
When you install a different mouse driver, such as IntelliPoint for Microsoft's IntelliMouse, the mouse driver currently
installed in the computer may need to be uninstalled.
For information on how to uninstall the driver, refer to "When Using an External Mouse." (
If not using the Touch Pad, and using an external mouse only, set [Touch Pad] to [Disable] in the [Main] menu of the Setup
Utility. ( page 67) And uninstall the mouse driver that is installed on this computer.
You do not know the available RAM module
Refer to Operating Instructions "Expanding Memory" or "Specifications".
To check if the additional RAM module has been installed successfully
If the installation is successful, the main memory and total RAM module size appears in the [Information] menu of the
Setup Utility ( page 66).
If the RAM module is not confirmed:
• Turn the computer off and reinsert the RAM module.
• Confirm the recommended specifications.
Regarding the RAM module, refer to Operating Instructions "Expanding Memory" or "Specifications."
The address map for IRQ, I/O port address, etc. is unclear
You can check with the following procedure.
Click (Start) - [Computer] - [System properties] - [Device Manager].
A
A standard user needs to enter an administrator password.
Click [View] - [Resources by type].
B
When a USB device is connected, an acoustic noise can be heard from the computer
Using the following procedure, set to [Disable] in the "USB Power Save Mode Switching Utility".
When the "USB Power Save Mode Switching Utility" is set to [Disable], the computer will not operate as long on the battery.
Click (Start) - [Control Panel] - [Uninstall a program].
A
When [USB Power Save Mode Switching Utility] is not displayed, perform the following procedures from step B.
When [USB Power Save Mode Switching Utility] is displayed, perform the following procedures from step C.
88
page 48)