Panasonic CF-T7 Series Reference Manual page 71

Setup Utility
You can select the boot device during start-up of the computer, too. Press Esc soon after [Panasonic] boot screen is
displayed. [Boot Menu] appears and you can select the device. [Boot Menu] appears only when [Boot First Menu] in
the [Security] menu is set to [Enable] (
be changed accordingly.
Exit Menu
Save Values & Exit
Exit Without Saving Changes
Get Default Values
Load Previous Values
Save Current Values
Repair Your Computer
Diagnostic Utility
page 69). When you change the setting in the [Boot] menu, [Boot Menu] will
To save the changes to CMOS and reboot.
To exit without saving the changes to CMOS.
To return the settings to the default values.
To load the previous values from CMOS.
To save the changes to CMOS.
To start System Recovery Options and run system
diagnostics and restoration.
This does not appear when the computer is turned on
for the first time after purchase (Windows has never
been started up), or when Hard Disk Erase Utility has
been executed.
The PC-Diagnostic Utility starts up, and it will auto-
matically begin the diagnostic check for all hardware
components. (⇒Operating Instructions "Hardware
Diagnostics")
71