Installing The Utility; Status Indication - Panasonic CF-T7 Series Reference Manual

Disabling/Enabling Wireless Communication

Installing the utility

1
Log on to Windows as an administrator.
2
Click (Start) and input [c:\util\wdisable\setup.exe] in [Start Search], and press
Follow the on-screen instructions to install the Wireless Connection Disable Utility.
Checking the status of the Wireless Connection
NOTE
The Wireless Switch Utility should also be installed so that the Wireless Connection Disable Utility works.
The utility does not automatically disable the Bluetooth connection.

Status indication

After installation, the Wireless Connection Disable Utility is automatically started after a user is logged in. An icon appears on
the notification area.
• : Indicates that
• the utility is enabled, and
• the wireless connection is disabled since a LAN cable is connected.
• : Indicates that
• the utility is enabled, and
• the wireless connection is enabled since no LAN cable is connected.
• : Indicates one of the following statuses;
• the utility does not monitor the LAN port status,
• the Wireless Switch Utility has not been started, or
• the built-in wired LAN device is not detected (In case of whether the wired LAN is deactivated using LAN Power-
Saving utility or [LAN] is set [Disable] in the Setup Utility.) or disabled with the device manager.
59
.
Enter