Installing The Hdd; Nvme Flexbay; Removing The Nvme Flexbay - Dell Precision 7820 Tower Owner's Manual

Installing the HDD

1. Insert the HDD to its slot in the HDD bracket with the connector end of the hard drive towards the back of the HDD carrier.
2. Slide the HDD carrier back into the hard drive bay.
3. Install the following:
a. HDD carrier
b. HDD bezel
c. side cover
4. Follow the procedure in

NVMe Flexbay

Removing the NVMe Flexbay

1. Follow the procedure in
2. Remove the:
a. side cover
NOTE: Do not remove the side cover, if the front I/O bezel is unlocked.
b. HDD bezel
3. To remove the NVMe flexbay:
a. Press the release button [1] to unlock the latch [2].
26 Removing and installing components
After working inside your computer
Before working inside your computer.