The Oven Light - Whirlpool RF390PXW Use And Care Manual

The oven light
The oven light will come on when you
open the oven door. To turn the light
on when the oven door is closed, push
the Oven Light Switch on the control
panel. Push the switch again to turn
off the light.
Electrical Shock and
Personal Injury Hazard
l
Make sure oven and light bulb
are cool and power to the oven
has been turned OFF before
replacing the light bulb. Failure
to do so could result in elec-
trical shock or burns.
l
The bulb cover must be in place
when using the oven. The cover
protects the bulb from breaking,
and from high oven tempera-
tures. Broken glass could cause
injury.
To replace the oven light:
1. Unplug appliance or disconnect at
main power supply.
2. Remove the bulb cover in the back of
the oven by pulling out and pushing
the wire holder to the side.
3. Remove the light bulb from its
socket. Replace the bulb with a 40
watt appliance bulb.
4. Replace the bulb cover and snap the
wire holder in place. Plug in appliance
or re-connect at main power supply.
NOTE: The oven light will not work
during the Self-Cleaning cycle.
27