Installation; Typical Installation; Grounding - Graco 236661 Instructions Manual

Installation

To reduce the risk of fire and explosion, always
maintain a minimum of 1 in. clearance inside the
material drum between rotating agitator parts and any
other objects, including the drum to prevent sparks
from contact. This includes the edges of the drum as
well as any item which may be inserted into the drum
from another opening, such as feed pumps or suction
tubes.

Typical Installation

Air line lubricator
Air line filter
Air regulator
and guage
F . 1 Typical Installation
IG
308371R
Agitator motor
Mix tank
(reference only)

Grounding

The equipment must be grounded to reduce the risk
of static sparking. Static sparking can cause fumes to
ignite or explode. Grounding provides an escape wire
for the electric current.
All electrically conductive objects or devices must be
properly grounded. Check your local electrical code for
detailed grounding instructions for your area and type of
equipment.
To ground the agitator, connect one end of the ground
wire (A) to the ground connector (B) on agitator
mounting bracket (see F
the ground wire to a true earth ground.
For a ground wire and clamp, order part 237569.
B
F . 2 Grounding
IG
Installation
. 2). Connect the other end of
IG
A
5