Step 2 Choosing The Installation Location - Samsung AC RN DKG Series Installation Manual

Step 2 Choosing the installation
location
Installation location requirements
There must be no obstacles near the air inlet and outlet.
Install the indoor unit on a ceiling that can support its
weight.
Maintain sufficient clearance around the indoor unit.
Before installing the indoor unit, be sure to check
whether the chosen location is well-drained.
The indoor unit must be installed such that it is
beyond public access and is not touchable by users.
The place where animals may urinate on the product.
Ammonia may be generated.
The place where is close to heat sources
Do not use the indoor unit for preservation of food
items, plants, equipment, and art works. This may
cause deterioration of their quality.
Do not install the indoor unit if it has any drainage
problem.
WARNING
Because your air conditioner contains R-32
refrigerant, make sure that it is installed, operated,
and stored it in a room whose floor area is larger
than the minimum required floor area specified in the
following table:
m (kg)
≤ 1.842
1.843
1.9
2.0
2.2
2.4
2.6
2.8
3.0
3.2
3.4
3.6
3.8
Ceiling-mounted type (A, m²)
No requirement
3.64
3.75
3.95
4.34
4.74
5.13
5.53
5.92
6.48
7.32
8.20
9.14
m (kg) Ceiling-mounted type (A, m²)
4.0
4.2
4.4
4.6
4.8
5.0
5.2
– m : Total refrigerant charge in the system
– A : Minimum required floor area
IMPORTANT: it's mandatory to consider either the
table above or taking into consideration the local law
regarding the minimum living space of the premises.
Minimum installation height of indoor unit is 0.6 m
for floor mounted, 1.8 m for wall, 2.2 m for ceiling.
CAUTION
As a rule, the unit cannot be installed at a height of
less that 2.5 m.
If you install the cassette or duct type indoor unit on
the ceiling with humidity over 80%, you must apply
extra 10 mm of polyethylene foam or other insulation
with similar material on the body of the indoor unit.
10.1
11.2
12.3
13.4
14.6
15.8
17.1
7
English