Disassembly Process Evaluation - TCL Alcatel FLASH2 PLUS Repair Document

L2 Repair Document
Make sure the MIC rubbers, receiver, side key FPC and P sensor rubber are assembled correctly.
The main PCBA must be connected with sub PCBA with the jig below when you upgrade the
software on PCBA only.
Jig list:
PN
WAA28P017001

5.5 Disassembly process evaluation

We list the FL02 parts disassembly time, technique levels and disassembly methods as below, for
technique levels, Class 1 signifies easy to disassembly, Class 2 signifies normal to disassembly and Class
3 signifies hard to disassembly.
Spare part
Furnished battery cover
Screws
Main/Sub antenna
furnished frame
Main PCBA
Sub PCBA
battery
Camera
Rev.
1.0
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
description
Jig for
downloading
Customizing
software on
main PCBA
Time for
disassembly
5s Plastic Flake
15s Screwdriver
10s Plastic Flake
5s Plastic Flake
5s Plastic Flake
2s tweezers
2s tweezers
FL02 Level 2 Repair Document
TCL
picture
Jigs for
Difficulty Class
disassembly
Class 1
Class 1
Class 1
Class 1
Class 1
Class 1
Class 1
Communication Ltd.
Remark
Page
36/59