L2 Repair Document
5.2 Disassembly tool
You may use the following tools during the disassembly and reassembly procedure:
Plastic Flake
Soldering iron
5.3 Disassembly process
The steps of disassembly 5095B are as below. 5095B and FL02 belong to same product family, so
their structures are very much alike.
Step1: Take off the back cover by using plastic flake.
Rev.
1.0
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
Tweezers
Suction cups
FL02 Level 2 Repair Document
TCL
Screwdriver
Hot wind gun
Communication Ltd.
Page
27/59