Using The Oven Control Baking - Whirlpool RF014PXR Use And Care Manual

Using the Oven Control
Baking
1. Position the racks properly before
turning on the oven. To change
rack position, pull rack out to
stop, raise front edge and lift out.
2. Set the Oven Control to the baking
temperature you want. The Oven
Signal Light will come on. The
oven is preheated when the Oven
Signal Light first goes off.
Racks should be placed so the top
of the food will be centered in the
oven. Always leave at least IYz to 2
inches (4-5 cm) between the sides
of the pan and the oven walls and
other pans. for more information,
see the "Cooking Guide:'
3. Put food in the oven. NOTE: Oven
racks, walls and door will be hot.
During baking, the elements will
turn on and off to keep the oven
temperature at the setting. The
Oven Signal Light will turn on and
off with the elements. The top
element helps heat during oven
preheat.
4. When baking is done, turn the Oven
Control to OFF.