NOTE:
Enne arvuti sisemuses tegutsema asumist tutvuge arvutiga kaasas oleva ohutusteabega ja järgige jaotises
kui arvuti sees toimetama asute
arvuti sees toimetamist
veebiaadressil www.dell.com/regulatory_compliance.
Procedure
1. Place the power-button board on the palm rest and keyboard assembly and align the screw hole on the power-button board with the
screw hole on the palm rest and keyboard assembly.
2. Replace the screw (M2x3) that secures the power-button board to the palm rest and keyboard assembly.
3. Adhere the tape that secures the power-button board to the palm rest and keyboard assembly.
4. Slide the power-button cable to the system board and close the latch to secure the cable.
5. Close the left hinge.
6. Replace the two screws (M2.5x5) that secure the left hinge to palm rest and keyboard assembly.
Replacing the power-button board
olevaid samme. Kui olete arvuti sees toimetamise lõpetanud, järgige jaotises
olevaid juhiseid. Ohutuse heade tavade kohta leiate enam teavet nõuetele vastavuse kodulehelt
Replacing the power-button board
37
Enne,
Pärast
69