Table of Contents
Advertisement
4. Route the display cable through the routing guides on the heat sink and the palm-rest and keyboard assembly.
5. Slide the display cable to the connector on the system board and close the latch to secure the cable.
6. Press down on the latch to connect the optical-drive connector board cable to the optical-drive connector board.
7. Press down on the latch to connect the optical-drive connector board cable to the system board.
Post-requisites
1. Replace the
wireless
card.
2. Replace the
base
cover.
3. Replace the
optical
drive.
64
Ekraanisõlme paigaldamine
Advertisement
Table of Contents
