Puuteplaadi Tagasipanek; Procedure - Dell Inspiron 3782 Service Manual

MÄRKUS Enne arvuti sisemuses tegutsema asumist tutvuge arvutiga kaasas oleva ohutusteabega ja järgige jaotises
Enne, kui arvuti sees toimetama asute
Pärast arvuti sees toimetamist
kodulehelt veebiaadressil www.dell.com/regulatory_compliance.

Procedure

NOTE: Ensure that the touchpad is aligned with the guides available on the palm-rest and keyboard assembly, and the
gap on either sides of the touchpad is equal.
1. Slide and place the touchpad into the slot on the palm rest and keyboard assembly.
2. Replace the four screws (M2x2) that secure the touchpad to the palm rest and keyboard assembly.
3. Adhere the tape that secures the touchpad to the palm rest and keyboard assembly.
4. Slide the touchpad cable into the touchpad connector on the system board and close the latch to secure the cable.
5. Slide the I/O-board cable into the connector on the system board and close the latch to secure the cable.
6. Slide the hard-drive cable into the hard-drive connector on the system board and close the latch to secure the cable.

Puuteplaadi tagasipanek

olevaid samme. Kui olete arvuti sees toimetamise lõpetanud, järgige jaotises
olevaid juhiseid. Ohutuse heade tavade kohta leiate enam teavet nõuetele vastavuse
25
Puuteplaadi tagasipanek 47