GE CARESCAPE User Manual page 108

Setting up the monitor before use
Adjusting sound volumes
You can adjust various sound volumes according to your care environment needs.
While you are adjusting the volume, you will hear a corresponding sound that will
guide you in determining a suitable level. All volumes other than Alarm Volume can be
set to 0 if required.
1. Select Monitor Setup.
2. Select Sound Volumes.
3. Adjust the different sound volumes:
Beat Volume
●
Completed NIBP Volume
●
Stimulus Beep Volume
●
Alarm Volume
●
Touch Volume. This selection is not adjustable if it has been locked in the Care
●
Unit Settings.
Brightness settings
B850 display brightness
For information on how to set the display brightness for B850 displays, refer to their
user manual.
Adjusting the display brightness automatically
With the automatic adjustment, the display brightness is automatically set according
to the ambient light. This same setting also turns on the B650 keyboard light
automatically.
1. Select Monitor Setup > Brightness.
2. Select the radio button for Automatic adjustment.
Adjusting the display brightness manually
With the manual adjustment, you can set the display brightness level according to
your needs.
1. Select Monitor Setup > Brightness.
2. Select the radio button for Manual adjustment.
3. Select Display % and adjust the display brightness in the range of 30% to 100%.
108
B650 and B450 only.
B650 and B450 only.
CARESCAPE Modular Monitors 2062971-001