Whirlpool RB265PXV Use And Care Manual page 17

Setting the Controls
Be sure the kitchen is ventilated during the Self-Cleaning cycle. This will
help normal smoke and heat to disappear from the room as quickly as
possible.
1.
Set the Oven Selector and Oven
Temperature Control on CLEAN.
The "on" Signal Light will come on
2. Lift the panel between the oven
door and the control panel. Move
the Lock Lever all the way to the
right.
3. Push in and release the Self-Clean
Button. A 3-hour Self-Cleaning
cycle will be set automatically.
The Display will count down the
time in minutes. The Auto Oven
Symbol, Self-Clean and "heating"
Signal Lights will come on.
If a cleaning cycle other than 3
hours is desired, push in and hold
the Bake Hours Button and turn
the Set Knob to the new time up to
4 hours.
l
Use 2 hours for light soil.
l
Use 3-4 hours for moderate to
heavy soil.
4. The "locked" Signal Light will
come on when the oven tempera-
ture exceeds normal baking tem-
peratures The Lock Lever must not
be moved and the door can't be
opened when the light is on. If you
want to see Stop Time of the
Self-Cleaning cycle, push the
Stop Time Button. Push the Self-
Clean Button to see cleaning time
again.
NOTE: The Bake Hours and Stop
Time Signal lights will flash dur-
ing the entire Self-Cleaning
cycle.
5. After the cleaning cycle is corn-
pleted, the Auto Oven Symbol,
Self-Clean and "heating" Signal
Lights will go off. The Display will
show the time of day When the
"locked" Signal Light goes off, move
the Lock Lever back to the left.
Do not force it. Wait until it will
move easily.
continued on next page I7