Repair Instructions; Product Overview; To Mount Screws - Husqvarna Automower 305 Workshop Manual

This chapter describes how to repair and change spare
parts. Refer to the Illustrated parts list (IPL) at the
manufacturer's support website.

6.1 Product overview

6.1.1 The body system
The body system is structured mechanically around the
modules that follow:
1. Top cover
2. Maintenance tool
3. Body
4. Rear bumper
2
1
6.1.2 The upper chassis
The upper chassis is structured mechanically around the
modules that follow:
1. Hatch to display, keypad and height adjustment
2. STOP button
3. Upper chassis
4. Keypad
5. Display
6. Height adjustment knob
1
3
1414 - 001 -

6 Repair instructions

4
3
6
5
4
2
6.1.3 The lower chassis
The lower chassis is structured mechanically around the
modules that follow:
1. Front body suspension parts
2. Rear body suspension parts
3. Lower chassis
4. Front wheels
5. Rear wheels
1
4
Note: There are 2 sealing strips between the upper and
lower chassis. Always replace the sealing strips when
the product is opened.
6.1.4 The cutting system
The cutting system is structured mechanically around
the modules that follow:
1. Cutting motor
2. Foot guard
3. Blade disc
1
2
3

6.2 To mount screws

It is important to mount the screws correctly. Incorrect
mounted screws may harm the product. The screw
dimension is Torx 20 when there is no other information.
2
5
3
Repair instructions- 17