Installation
1. Ensure the battery is fully charged before using the phone.
2. With the arrow facing you as shown in the diagram push the
plug on the battery adapter into the socket on the bottom of
the phone until it clicks into place.
3. Connect the other end of the travel adapter to the mains
socket. Use only the included packing charger.
4. The moving bars of battery icon will stop after charging is
complete.
Caution
]
Do not force the connector as this may damage the phone
and/or the travel adapter.
]
Insert the battery pack charger vertically to wall power outlet.
]
If you use the battery pack charger out of your own country,
use an attachment plug adaptor for the proper configuration.
]
Do not remove your battery or the SIM card while charging.
Warning
]
Unplug the power cord and charger during lightning storms to
avoid electric shock or fire.
]
Make sure that no sharp-edged items such as animal teeth,
nails, come into contact with the battery. There is a risk of this
causing a fire.
]
Do not place or answer calls while charging the phone as it
may short-circuit the phone and/or cause electric shock or
fire.
12
Disconnecting the charger
Disconnect the travel adapter from the phone by pressing its
side buttons as shown in the diagram.
Memory card
The P7200 is equipped with a slot on the side for a memory card
with a maximum of 128MB capacity. You can use this card to
save data files such as photos, video, audio, contact point,
schedule.
Note
]
Always insert/remove the memory card with the handset
power off.