Settings Pane - Agilent Technologies SureScan G4900DA User Manual

Settings pane

Figure 21 Scan Control – settings pane
The settings pane lets you change individual settings for a selected slide. To change settings, the
slide must not be in the scan queue. For more information on the settings available in this table,
see "Scan Protocol Editor dialog box"
Scan Settings Displays scan settings from the assigned scan protocol. To change a setting, click next to the
setting name and select a new value from the list. For more information, see
page 78.
Image Settings Some data analysis programs have specific requirements for the images. This section lets you
change how the image is created from the scan. For more information, see
page 80.
File Naming Shows selections for how the program names scan files. For more information, see
Settings Settings"
Scan In this area, you can type information about the microarray slide or scan. This information
Description becomes part of the file information that can be displayed in the Feature Extraction program.
User In this area, you can type information about the operator who set up and performed the
microarray scans. This information becomes part of the file information that can be displayed in
the Feature Extraction program.
SureScan System User Guide
on page 80.
on page 77.
"Scan Settings" on
"Image Settings" on
"File Naming
72