Connections - Sony Trinitron KV-25XBR Service Manual

:V-25XBR
111-724iAPM-X3U
0
VIDEO 3/EXT(external)·AUDIO selector
If you have connected a VCR, video disc player, etc., to
the VIDEO 3 INPUT jacks, set to "VIDEO 3".
If you desire to mix the sound of the external audio
source connected to the
0
External audio jacks with
the picture of the TV program, set to "EXT-AUDIO"
AUX (auxiliary)
terminal
TO CONVERTER
terminal
VHF/UHF/CATV antenna
terminal
V HOLD (Vertical hold) control
a
0
© ©
©
@
©
E!
© ©
centering) control
BASS BOOST ON/OFF switch
SPEAKER terminals
0
H CENT (horizontal centering) control
Usually keep this control at the center detent position.
If ~he display of the equipment connected to the f.) RGB
MULTI INPUT connector is shifted off center to the left
side or right side of the screen, turn this control until the
display is centered.
4D)
4D
CONTl=IOL IN/OUT jacks
These jacks are for connecting a future audio or video
product also equipped with similar CONTROL IN or OUT
jacks for the expansion of your audio-video system.
@ FROM
TV
St AND connector (6-pii'I DIN)
Connect the optional SU-171 TV s~and which will enable
you to turn on an.doff the power, adjust the volume, and
select the channel of this TV with foot pedals.
ti) BASS BOOST ON/OFF switch
When the sllpplied side-mounting speakers are used,
set this switch to ON to enhance the ba$S sound.
When a larger speaker system is used, set this switch to
OFF to prevent e.xcessive bass.
1-5. CONNECTIONS
OPTIONAL AUDIONIDEO CONNECTING CABLES
The optional connecting c.ables to be used for connect-
ing other equipment depend upon what type of audio
and videq jacks the equipment you desire to connect
has. The following charts will help you choose which
cable you should use.
Cables to be co,onected to the VIDEO 1 and 3 INPUT
jacks
The type of audio and
video jacks of the equip-
Connecting cable to be used
ment to be connected.
Video
Au?io (L, R)
(phono-type) (phorio-type)
~
@ @ @
Video
Audio
VMC-1MP3 (1 m),
(phono-type)
(mini-type)
~
@
®
Video
Audio
(phono-type)
(phono-type)
~
@ @
Cables to be connected to the VIDEO 2 IN and TV 01,JT
(AV type) jacks
The type of audio and
video jacks of the equip-
Connecting cable to be used
ment to be connected.
Video
Audio (L, R)
(phono-type) (phono-type)
~
@ @ @
Video Audio
~
(phono-type)
(phono-type) ~*
@ @
*The PC-21 is supplied
to the cable for a mini-type
.audio Input.
The following are few examples of the possiple cormec-
tions.
NOTES ON CONNECTION
• Before connecting, make sure that the power to
each piece of equipment is turned off.
• The p[ugs should be fully inserted into the jacks. A
loose connection may cause hum and noise.
• Match the color when connecting the plugs to the
jacks.
- 12 -