Presetting Channels - Sony Trinitron KV-25XBR Service Manual

P2b chassis scc-595b-a
Hide thumbs Also See for Trinitron KV-25XBR:
Table of Contents

Advertisement

KV-25XBR
RM-724/APM-X3U
1-3. PRESETTING CHANNELS
Controls on the TV
ADD button
button
button
Channel number __
,,,_,
buttons
. ---- - --_Jj
011=1
~---~
Remote Commander
CHANNEL
scan buttons
Receivable channels of your set are:
VHF: 2-13
UHF: 14-69
CATV:
1-125
By adding and erasing channels, you can preset your TV
so that only the desired channels appear in sequence
when the CHANNEL+/-
are pressed.
PREPA~ATION
1
Turn on TV.
2 l\llake· sure the following are properly set.
On-screen "VIDEO 1, 2 or 3", "EXT-A" or "RGB" in-
dicators and the RGB or VIDEO lamp should be off.
(Press TVNIDEO button or RGB button as necessary
until ~hey go out.)
3 According to tt1e channel to be adde_d or erased,
check the following and make tt1e necessary changes
if any.
• CABLE ON/OFF button
For VHF and UHF channels, set to OFF
n
For cable TV channels; set to ON
=
• On-screen "AUX" indicator
(Press ANT/AUX button as necessary.)
For VHF; UHF and regular cable TV channels:
The indicator should be off.
For pay cable TV channels:
The indicator should be displayed.
ADDING CHANNELS
1
Select the channel to be added by pressing the chan-
nel number buttons and then ENTER.
2
Pr.ess ADD.
A"+" ingication will appear on the left of the chan-
nel display on the screen, indicating that t_he ch_an-
ne! will appear in the proper numerical sequence
when you press CHANNEL+/-.
Repeat steps
1
and
2
for other channels to be added.
ERASING CHANNELS
1
Select the channel to be erased.
2 Press ERASE.
A"-"
indication will appear on the left of the chan-
nel display on the screen, indicating that the chan-
nel has been erased. When CHANNEL +/~ are
pressed, you will see that the channel is skipped
over in the numerical sequence.
Repeat steps
1
and
2
for other channels to be erased.
To add erased channels again, follow the steps in "AD-
DING CHANNELS".
Note
You cannot erase a VHF or UHF channel from the
memory and retain a cable TV channel which has the
same number, or vice versa. If either a VHF/UHF chan-
nel or a cable TV channel with the same number is to be
kept in the memory, do not erase the number.
-10
-

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rm-724Apm-x3u

Table of Contents