Great Features; Confirmation Of Included Items - Roland CAMM SCRIBE CS-20 User Manual

1 Great Features

Engraving - ENGRAVER
You can engrave nametags and other plastic plates.
The character cutter is usually used for engraving.
Cutting - CUTTER
You can cut materials such as commercially available vinyl films, fluorescent and reflective sheets, and rubber sheets for
sandblasting stencils.
The appropriate blade for the material to be cut should be used.
Plotting - PEN
You can perform plotting on plastic plates and sheets.
This function can also be used to check tool movement before material is actually cut.
Scoring - SCORE
This scribes the surface of materials such as aluminum or brass. An optional diamond scraper that has diamond chips
embedded in its blade tip is used to engrave the surface of the material by scraping. This produces a lustrous engraved area
and an attractive finish, especially when aluminum is used.

2 Confirmation of Included Items

This product is packed with the following accessory items in addition to the CAMM SCRIBE. Before using the CAMM SCRIBE,
check to make sure that all items are included.
Character cutter -- 1 Blade for sheets -- 1
Engraving-tool
holder -- 1
Spanner -- 1
Hexagonal screw-
driver -- 1
Hexagonal wrench
-- 1
Tools and pens that can be used with the CAMM SCRIBE are optionally available from
Roland DG Corp. For details, see "Appendix A List of Options"
Oil based fiber
tipped pen
Blade holder -- 1
Test material -- 1 set
Sheet
Power cord -- 1 CAMM SCRIBE DRIVER
for Windows 95 and
Windows 3.1 -- 1
EZ SCRIBE -- 1
Tool adapter -- 1
-- 1
(Spring and
Spacer -- 1 each)
Adhesive sheet for
securing material
-- 1 sheet
Plate
User's manual -- 1
EZ SCRIBE
User's manual -- 1
Diamond scraper
adapter -- 1
Dust collector hose
and duct -- 1
1