Driver Software Installation; Interface Setup; Powerup - Roland CAMM SCRIBE CS-20 User Manual

Driver Software Installation

This product includes driver software for Windows.
This driver must be installed if you are using Windows.
Refer to the explanation included with the driver to install it.

Interface Setup

CAMM SCRIBE automatically detects the type of interface (parallel or serial) from the first batch of data sent from the
computer after the power is switched on.
When using a serial connection for the interface, however, the communication parameters on the computer should be set
as follows.
The communication parameters for the CAMM SCRIBE are locked in and cannot be changed.

Powerup

To ensure safety, operation of the CAMM SCRIBE is paused when the power is switched on.
Press the PAUSE/VIEW key to end the paused state.
Switch on the CAMM SCRIBE's power switch.
1
(The PAUSE LED flashes at this time.)
The tool carriage moves to the left rear.
3
Communication parameters for a serial connection
Press the PAUSE/VIEW key.
2
TEST VIEW SET ORIGIN
The tool carriage stops when it reaches the VIEW
4
position (inner right-hand side).
The CAMM SCRIBE is now ready to receive data.
5