Recording Discs; Recording With Cd Manager; Normal Recording - Panasonic SC-PM11 Operating Instructions Manual

1
1
CD1 CD2 CD3
STOP
2
REC
20
RQT5706
CD4 CD5
REC
FWD

Recording discs

Preparation:
•
Do the preparatory steps (z page 19).
•
Press [SELECTOR] to select disc as the source and insert the disc(s)
you want to record (z page 11).

Normal recording

Press [(CD 1) ~ (CD 5)] to select the disc to be re-
corded, then [STOP L] to stop play.
Press [a REC/J] to start recording.
The CD starts.
2
To stop recording
Press [STOP L].
The CD stops, and the tape stops after making a 4 second silent
interval.
To record programmed tracks
1 Program the tracks (z page 13).
2 Press [a REC/J] to start recording.
Play starts.
To stop recording, press [STOP L].
Disc play stops automatically.

Recording with CD Manager

Record discs after selecting the required CD MANAGER mode
(1-TRACK, 1-DISC, 1-ALL)
•
If a track is cut off in the middle at the end of the front side while
recording, the track will be recorded from the beginning on the
reverse side.
•
At the end of the reverse side, recording stops and the current track
will be interrupted.
•
Recording pauses while discs are changing and resumes when the
disc is ready.
1 Do steps 1 to 4 on page 14.
2 Press [a REC/J] to start recording.
Play starts.
To stop recording
Press [STOP L].
Disc play stops automatically.
(z page 14)